欢迎来到上海速通机械有限公司官方网站!
上海喷砂机
当前位置: 首 页 >> News >> Company news

Effective method to reduce dust generation of Kunshan sandblasting machine

2018-07-03

Generally, when we use the sandblasting machine, there will be a lot of dust, so the staff need to wear protective equipment, but because of the more dust, there will also be some dust into the sandblasting machine, for a long time, the sandblasting machine will fail, so in order to avoid the failure of the sandblasting machine, we need to timely clean and reduce the generation of dust. So what are the ways to reduce the generation of dust? Today, Suzhou small sand blasting machine will introduce the effective method to reduce dust generation of Kunshan sand blasting machine.

1. When the sandblasting machine is not used in a short time, it should be vented and drained.

2. When the sandblasting machine is out of service for a long time, in addition to exhaust and drainage, all abrasives in the sandblasting machine shall be discharged, the air supply pipe and sandblasting pipe shall be removed and stored in a cool and dry place.

3. Vulnerable parts (nozzles, sandblasting pipes, wear-resistant bushes, etc.) shall be inspected regularly or regularly, and shall be replaced in time in case of serious wear.


昆山喷砂机

4. Sand blasting pipe, air supply pipe and other rubber pipes are not allowed to be dragged on sharp tools. If they are stained with oil, they shall be cleaned in time.

Generally, the sandblasting machine should turn off the power after each use, lightly press the dust removal switch on the top, let the dust vibrate to the bottom of the dust removal box, open the cover plate at the bottom of the dust removal box, and discharge the dust. Then, for users who spray continuously and use the finer sand, they usually need to clean it every one or two hours.

5. Open the door of the dedusting box, often use the air cleaner to clean the lower dedusting bag, so that the dedusting bag does not block the bag hole due to the long-term accumulation of fine dust, thus affecting the dust filtering effect and the sand blasting sight.

6. Every few months, the cloth bags need to be cleaned or replaced; in the selection of sand materials, we should try our best to purchase better quality. In order to effectively reduce dust during sand blasting, we need to do the above.4. Sand blasting pipe, air supply pipe and other rubber pipes are not allowed to be dragged on sharp tools. If they are stained with oil, they shall be cleaned in time.

Generally, the sandblasting machine should turn off the power after each use, lightly press the dust removal switch on the top, let the dust vibrate to the bottom of the dust removal box, open the cover plate at the bottom of the dust removal box, and discharge the dust. Then, for users who spray continuously and use the finer sand, they usually need to clean it every one or two hours.

5. Open the door of the dedusting box, often use the air cleaner to clean the lower dedusting bag, so that the dedusting bag does not block the bag hole due to the long-term accumulation of fine dust, thus affecting the dust filtering effect and the sand blasting sight.

6. Every few months, the cloth bags need to be cleaned or replaced; in the selection of sand materials, we should try our best to purchase better quality. In order to effectively reduce dust during sand blasting, we need to do the above.



标签

最近浏览:

Copyright © Shanghai Sutong Machinery Co., Ltd All rights reserved Specializing in Shanghai sandblasting machine, Kunshan sandblasting machine, Suzhou sandblasting machine,Welcome to inquire! 技术支持:祥云平台

Tel: 13681768829   address: 3568 caoying Road, Qingpu District, Shanghai

热推产品  |